W20-E5 Home Energy Storage Battery

The W20-E5 is a solar lithium battery for home use. Its intelligent Battery Management System (BMS) can monitor and optimize battery performance in real – time, extend its service life, and enable remote control via a mobile app, making it convenient for you to track your home’s energy situation. It is easy to install, and the wall – mounted design saves space. In case of an emergency, it can serve as a power bank to supply power to home appliances, adapting to various scenarios。

TECHNICAL SPECIFICATIONS

MODEL

W20-E5

CAPACITY

NOMINAL CAPACITY

RATED CAPACITY

400Ah

NOMINAL ENERGY

RATED ENERGY CAPACITY

RACK RATED ENERGY CAPACITY

BATTERY CONFIGURATION CAPACITY

CELL TECHNOLOGY

~525×917×246 mm Lithium Iron Phosphate 8,000 cycles @ 70%DOD,25°C/0.5C

CELL SPECIFICATION

NOMINAL VOLTAGE

51.2V

OPERATING VOLTAGE

44.8~56.16V

VOLTAGE RANGE

MPPT INPUT VOLTAGE

RATED POWER

RATED OUTPUT POWER

RATED AC POWER

MAX. AC OUTPUT ACTIVE POWER

MAX. ALLOWABLE INPUT POWER

OUTPUT POWER FACTOR

EFFICIENCY

MAX. EFFICIENCY

MAX. ROUND-TRIP EFFICIENCY

THDi

MAX. CHARGE/DISCHARGE CURRENT

INSTANTANEOUS DISCHARGE CURRENT

DEPTH OF DISCHARGE (DoD)

DIMENSIONS (W × D × H)

~525×917×246 mm Lithium Iron Phosphate 8,000 cycles @ 70%DOD,25°C/0.5C

WEIGHT

BATTERY IMPEDANCE

RESISTANCE

OPERATING TEMPERATURE

-20°C ~ 60°C

DISCHARGING TEMPERATURE

IP RATING

IP 20

CYCLE LIFE

~525×917×246 mm Lithium Iron Phosphate 8,000 cycles @ 70%DOD,25°C/0.5C

COMMUNICATION

RS232 / CAN / RS485

CERTIFICATION

STANDARDS

CHARGING & INVERTING INTEGRATED MACHINE

MPPT

DCDC

LITHIUM BATTERY

12V MULTI-FUNCTION MODULE

CONTROL PANEL

WATER LEVEL SENSOR

APP

FEATURES

Multi-Scenario Adaptability

Supports wall-mounted/floor-standing installation, optional mobile storage with wheels, and IP20 for all-weather use

Long Lifespan & High Safety

Uses A+ LFP cells, has built-in hot aerosol fire extinguisher, and 8,000 cycles (70% DOD, 25°C/0.5C)

Low Maintenance

Firmware update via BLE; check status and configure BMS remotely

Flexible & Expandable

Up to 20 units in parallel, max system capacity 409.6kWh

Intelligent Control

BMS optimizes performance in real time; remote control via app for home energy tracking

Emergency Practicality

Easy to install, space-saving; acts as emergency power for home appliances

COMPATIBLE INVERTER BRANDS

PRODUCT DETAILS

The W20-E5 is a solar lithium battery for home use. Its intelligent Battery Management System (BMS) can monitor and optimize battery performance in real – time, extend its service life, and enable remote control via a mobile app, making it convenient for you to track your home’s energy situation. It is easy to install, and the wall – mounted design saves space. In case of an emergency, it can serve as a power bank to supply power to home appliances, adapting to various scenarios。

Reviews

There are no reviews yet.

Be the first to review “W20-E5 Home Energy Storage Battery”

Your email address will not be published. Required fields are marked *

FREQUENTLY ASKED QUESTIONS

Lithium Valley products use LiFePO4 cells and a multilayer battery management system. Always follow the product datasheet, local electrical regulations, and approved installation practices.
Routine maintenance is limited to keeping the installation area clean, checking connections, reviewing system alerts, and following the inspection schedule in the product manual.
Expansion capability depends on the specific model, inverter compatibility, firmware, and installation design. Confirm the supported parallel quantity in the model datasheet before adding modules.
Compatibility differs by model and communication protocol. Use the compatible-brand section and the latest datasheet as the primary reference, or contact Lithium Valley for confirmation.
Scroll to Top