The LiTHIUMVALLEY SCA261L100P-13W is a commercial-grade energy storage system (BESS) with a total capacity of 250 kWh. It is paired with two Monet-125 AC photovoltaic inverters. It utilizes lithium iron phosphate (LiFePO4) batteries with a cell size of 3.2V and 314Ah. Each battery pack has a capacity of 52.24 kWh. A 1P260S battery pack configuration provides a cycle life of 28,000 cycles (at 25°C, 0.5/0.5P). With a nominal voltage of 832V, an operating voltage of 728-949V, and a rated charge and discharge power of 0.5P, it is suitable for industrial and commercial energy management scenarios.
SCA261L100P-13W
The LiTHIUMVALLEY SCA261L100P-13W is a commercial-grade energy storage system (BESS) with a total capacity of 250 kWh. It is paired with two Monet-125 AC photovoltaic inverters. It utilizes lithium iron phosphate (LiFePO4) batteries with a cell size of 3.2V and 314Ah. Each battery pack has a capacity of 52.24 kWh. A 1P260S battery pack configuration provides a cycle life of 28,000 cycles (at 25°C, 0.5/0.5P). With a nominal voltage of 832V, an operating voltage of 728-949V, and a rated charge and discharge power of 0.5P, it is suitable for industrial and commercial energy management scenarios.
TECHNICAL SPECIFICATIONS
MODEL
SCA261L100p-13W
CAPACITY
NOMINAL CAPACITY
RATED CAPACITY
NOMINAL ENERGY
522kWh
RATED ENERGY CAPACITY
RACK RATED ENERGY CAPACITY
BATTERY CONFIGURATION CAPACITY
CELL TECHNOLOGY
CELL SPECIFICATION
NOMINAL VOLTAGE
832V 728-949V
OPERATING VOLTAGE
832V 728-949V
VOLTAGE RANGE
MPPT INPUT VOLTAGE
RATED POWER
250kw
RATED OUTPUT POWER
RATED AC POWER
MAX. AC OUTPUT ACTIVE POWER
MAX. ALLOWABLE INPUT POWER
OUTPUT POWER FACTOR
EFFICIENCY
MAX. EFFICIENCY
MAX. ROUND-TRIP EFFICIENCY
THDi
MAX. CHARGE/DISCHARGE CURRENT
INSTANTANEOUS DISCHARGE CURRENT
DEPTH OF DISCHARGE (DoD)
DIMENSIONS (W × D × H)
1300×1550 x2090mm
WEIGHT
BATTERY IMPEDANCE
RESISTANCE
OPERATING TEMPERATURE
DISCHARGING TEMPERATURE
IP RATING
IP54
CYCLE LIFE
≥8000 cydes(@25°C, 0.5P/0.5P)
COMMUNICATION
CERTIFICATION
IEC/EN 61000,IEC 62619,UN38.3, MSDS
STANDARDS
CHARGING & INVERTING INTEGRATED MACHINE
MPPT
DCDC
LITHIUM BATTERY
12V MULTI-FUNCTION MODULE
CONTROL PANEL
WATER LEVEL SENSOR
APP
FEATURES
Total Capacity & Inverters
250kWh commercial-grade energy storage system (BESS), paired with two Monet-125 AC photovoltaic inverters
Battery Configuration
Uses lithium iron phosphate (LiFePO₄) batteries (3.2V/314Ah), with each battery pack at 52.24kWh.
Cycle Life
IP260S configuration enables 28,000 cycles (at 25°C, 0.5P/0.5P).
Electrical Performance
Nominal voltage 832V, operating voltage 728–949V, fits 0.5P charge/discharge scenarios.
Protection & Dimensions
IP54 rating; dimensions: 1300×1550×2090mm (W×D×H).
Certifications & Scenarios
Complies with IEC/EN 61000, UN38.3, etc.; suitable for industrial and commercial energy management.
COMPATIBLE INVERTER BRANDS
PRODUCT DETAILS
RELATED PRODUCTS
Related products
-
Industrial & Commercial Energy Storage System
Outdoor C&I Cabinet (Built-in PCS)
-
Industrial & Commercial Energy Storage System
Full Liquid Cooling System
-
Industrial & Commercial Energy Storage System
SafecubeA100A50PT
-
Industrial & Commercial Energy Storage System
Mobile Energy Storage System
FREQUENTLY ASKED QUESTIONS
Lithium Valley products use LiFePO4 cells and a multilayer battery management system. Always follow the product datasheet, local electrical regulations, and approved installation practices.
Routine maintenance is limited to keeping the installation area clean, checking connections, reviewing system alerts, and following the inspection schedule in the product manual.
Expansion capability depends on the specific model, inverter compatibility, firmware, and installation design. Confirm the supported parallel quantity in the model datasheet before adding modules.
Compatibility differs by model and communication protocol. Use the compatible-brand section and the latest datasheet as the primary reference, or contact Lithium Valley for confirmation.
Reviews
There are no reviews yet.